+86-769-81880316 contact@labx7.com

The T330 is an aesthetically beautiful and portable temperature and humidity monitor and recording system based on NB-IOT. Now stay connected with your information wherever you are. The T-330 comes with IP66 water proofing housing and can be used in extreme weather conditions. Deep freezer or smart farms, you can now check your levels from the comfort of your palm. The T330 temperature and humidity monitor is not just a visual treat but also light weight and power-packed with features. It comes with built in memory and will generate reports too! Read below for more information.

LABX7 T330 NB-IoT – A versatile temperature and humidity monitor and recorder

LabX7 now integrates temperature sensors with NB-IoT in a beautiful and compact design. Now be connected with your information wherever you desire. NB-IoT temperature sensors transmit data wirelessly to the T330 using the backbone network and Narrowband-IoT communication technology. That means you do not need any additional devices to send measurements from the sensor. The T330 enables, among others measurements recording, notifications about exceeding safe thresholds and generates automatic reports. The devices are powered by 2000mAH batteries that ensure their maintenance-free operation for a period of at maximum two years. The sensor logs 65,000 temperature measurements in its memory.

The T330 is aesthetically pleasing, rugged and compact. The device has low power consumption, strong signal penetration, long communication distance, strong anti-interference ability, and convenient network performance. The temperature and humidity sensor is imported from abroad, and its surface is overmolded, which can reduce the sensor’s influence by external factors such as aging, vibration and volatile chemical gases, ensuring its stability – multiple EMC detection and industrial grade component selection.

Product Features

– Built-in imported high-precision temperature and humidity sensor with high measurement accuracy.

– NB-IOT Narrowband IoT network communication technology, with strong signal penetration, suitable for working in poor communication and complex environments.

– Built-in rechargeable battery, 6-24 months battery life design. 6 months @60 minutes upload

– Dual data insurance mechanism to ensure no data loss.

– Multiple EMC inspection and industrial grade component selection.

– Can be set to disable the shutdown function to prevent human error

– One-click operation, ready to use.

– Support for access to light and vibration sensors.

– IP66 waterproof design to meet most work scenarios.

– OLED screen display, small and beautiful (2/3rd the size of a cigarette box).

The T330 NB-IOT temperature and humidity monitor is suitable for scenarios where the communication signal is relatively shielded, the number of devices accessed is large, and the single battery life time is long. Use case scenarios:

LABX7 T330 NB-IoT – A Portable Temperature and Humidity Monitor 1
Freezers
LABX7 T330 NB-IoT – A Portable Temperature and Humidity Monitor 2
Ice warehouse
LABX7 T330 NB-IoT – A Portable Temperature and Humidity Monitor 3
Laboratories
LABX7 T330 NB-IoT – A Portable Temperature and Humidity Monitor 4
Farms
T330 Technical specifications
Temperature measurement Accuracy±0.5℃(-10~+45℃)
±1℃(45~+70℃)
±2℃(-40~-10℃)
Temperature Range-20~+60℃(Built in probe)、-40~+70℃ (External)
Humidity Measurement±5%RH (20%~80%RH)
±8% RH (other range)
Humidity measurement range1 to 99% RH
Resolution0.1
TargetingLBS base station positioning
Network standardNB-IOT
SIM cardBuilt in (factory installation)
Upload interval1 minute to 1440 minutes, can be modified by factory configuration or platform software
Excessive alarm promptOLED screen
Equipment operation modeStandard mode, no shutdown mode
Device software upgradeLocal USB interface upgrade, platform remote upgrade
Power supply2000mAh (T330) 3.7V rechargeable lithium battery
Power Adapter5V/1A, micro USB interface
Charging timeAbout 8 hours
EnduranceSee product selection list description
Storage environmentTemperature: -20~+60°C, humidity: 0~99%RH, no condensation
Waterproof levelIP66
Drop ratingReference standard: GB/T 2423.8-1995
Host housingABS
WeightAbout 150g (T330)
Host size53*85*16MM(T330)

Please contact LABX7 to find out how we can assist you to customize the devices to your local eco-system and for test samples. We are keen to help you bring your IoT products to the market, and gain customer recognition!

ADDRESS

205,E3 Bldg.,OCT Area,

Nanshan District,

Shenzhen,China

CONTACT DETAILS

0086-755-26915158

contact@labx7.com

}

Trading Hours: 12 ×7